[Healeys] Initial mixture setting post (thinking upside down)

[David P]

I eyeball them ~ 1/4" below the bridge.. go from there.. allow 20-30 
seconds between adjustments for the engine to respond to changes.. FWIW, 
4 bangers like it rich..IMO

On 6/26/2020 10:24 AM, Michael Oritt wrote:
> In my last post I said that the nuts were adjusted all the way up to 
> the "richest" setting.  I was, of course, wrong and full up is the 
> LEANEST setting.  So my question is how many turns the jet nuts should 
> be initially dropped towards rich.
>
> TIA--Michael Oritt
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
>
-- 
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here: WWW.PORTERBIKES.COM/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200626/e1deab02/attachment.htm>