[Healeys] Initial mixture setting on H6 carb

David Nock healeydoc at gmail.com
Fri Jun 26 10:50:09 MDT 2020

Bring the jet up to flush with the bridge inside the carburettor. The drop the jet 12 flats. As long as your float level and needle set correctly, this will get you very close to where you need to be.

David Nock
healeydoc at sbcglobal.net
209 948 8767

Help us have our Founder Norman Nock inducteed into the 
British Sportscar Hall of Fame, You can vote for your favorites 
by visiting the site at.

From: Michael Oritt 
Sent: Friday, June 26, 2020 9:13 AM
To: Austin Healey 
Subject: [Healeys] Initial mixture setting on H6 carb

Following a rebuild I am about to reinstall the H6 carbs on my 100.  The mixture nuts are presently run all the way up to richest position and because the nuts are somewhat difficult to access I would like to get the initial mixture setting correct before mounting up the carbs.  

Four full turns down (TOWARDS LEAN) sticks in my mind as being the recommended starting point but I am not at all sure and would appreciate input here.

TIA--Michael Oritt

Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200626/5d93efc1/attachment.htm>

More information about the Healeys mailing list