[Healeys] Brake Line Clips

[Stephen Hutchings]

You might enquire with some other suppliers- I know I found the after market clips really stiff, brittle and hard to work with.
I ended up urethras-using the originals, after cleaning them up and painting them.

Stephen, BJ8

> On Jun 24, 2020, at 7:24 PM, Michael MacLean <rrengineer.mike at att.net> wrote:
> 
> My BN2 project is slowly progressing, even in this Siuthern California heat.  90+ most days.  The garage is a hot box during the day, so I work mostly on the car after the sun goes down.  Last night I was instally my present brake lines i purchased years ago from the late Doug Finespanner.  His pre-bending was quite good and it was easy to figure out which line went where.  Then I came to installing the hairpin clips to locate the lines.  I have not been able to put one clip in.  Is there some technique to istalling these clips? I tried pinching the top tines with the brake line in the rounded seat and the pushing it in the hole.  I could not get it to go.  Anyone tell me exactly what the clip is supposed to look like, thickness of the clip, etc.  I have the clips supplied by Moss that double for the fuel lines.
> Mike MacLean
> <20200623_204913.jpg>
> <20200623_201026.jpg>
> 
> 
> 
> 
> Sent from AT&T Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature><20200623_204913.jpg><20200623_201026.jpg>_______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/s.hutchings@rogers.com
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200624/17e30c67/attachment.htm>