[Healeys] Steering Box Questions
Chris Dimmock
austin.healey at gmail.com
Sat Jan 25 16:33:28 MST 2020
Penrite comes in grease gun cartridges.
I replace the filler with a 1/4 bsp nipple to fill
https://www.penriteoil.com.au/assets/pis_pdfs/STEERING%20BOX%20LUBE.pdf
> On 26 Jan 2020, at 6:18 am, Roger Grace <roggrace at telus.net> wrote:
>
> Two questions for the more experienced among us ...
>
> My BJ8 steering box is leaking. From the front cover and more significantly from the shaft.
>
> Firstly, is it possible to replace the shaft oil seal without removing the box ? - that is not going to happen at the moment.
> Looks sort of feasible to me and possibly the most difficult issue would be extracting the old seal ?
>
> Secondly as often mentioned here is to refill the box with some Penrite or similar NGLI 00 liquid grease. Is there a sensible/practical tecnique to get it into the filler hole ?. Grease gun with plastic tube ? Sounds messy job to me.
>
> Comments/ideas appreciated.
>
> rg
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200126/9487a89d/attachment.htm>
More information about the Healeys
mailing list