[Healeys] Tie Rod End Slotted Nuts

[warthodson at aol.com]

To the best of my knowledge, there are NO metric hardware on an original BN1. 
Gary Hodson

-----Original Message-----
From: Charles Schott <schottc at knology.net>
To: Michael MacLean <rrengineer.mike at att.net>
Cc: Healeys <healeys at autox.team.net>
Sent: Fri, Jan 3, 2020 3:09 pm
Subject: Re: [Healeys] Tie Rod End Slotted Nuts

I need three slotted nuts for the original tie rod ends on a BN1. They appear to be metric 11M X 1.5 but I cannot find them. Does anyone have them or know where I can get them? Thanks.
Regards,
Charlie

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/schottc@knology.net


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200103/c8ab49d7/attachment.htm>