[Healeys] boot hinges

Autofarm@wightman.ca autofarm at wightman.ca
Wed Jan 1 11:38:00 MST 2020


If you look inside the long part of an original hinge you will see that they are marked L/H or R/H. Looking from the bottom side you can easily see the slope of the short parts going in opposite directions.
Cheers......Bob

Sent from my iPad

> On Jan 1, 2020, at 12:42 PM, richard mayor <boyracer466 at gmail.com> wrote:
> 
> The hinges are handed. This is what Michael is referring to when he says the "angle of the base".  It is very hard to tell which is which if you only look at one by itself. They are not marked as LH or RH.  If you put two of them side by side, a left hand and a right hand, it will then become very apparent.  
> 
>> On Wed, Jan 1, 2020 at 6:48 AM Michael Salter <michaelsalter at gmail.com> wrote:
>> Just a comment on that type on hinge, all of which were made by Wilmot Breedon, be very careful of the profile and angle of the base. 
>> The idea is that when installed the hinge pins are perfectly in line.
>> If incorrect angle hinges are used a paint job can be ruined  ... don't ask me how I know 🙄
>> 
>> M
>> 
>>> On Wed, Jan 1, 2020, 7:05 AM Kees Oudesluijs, <coudesluijs at chello.nl> wrote:
>>> A friend of mine is working on a Jensen Interceptor, not the well known large coupe's from the late 1960's early 1970's but what is known in Jensen circles as the "early Interceptor" from the 1950's based on an adapted Austin platform with a 4ltr Austin engine. It would not be surprising if the Interceptors bonnet hinges are the same as on the boot of one of the big Healey's, as both cars were built by the Jensen factory. Probably a lot of common parts were used.
>>> 
>>> See below:
>>> 
>>> Alan at Kestrel believes the bonnet hinges on the early Interceptor are Big Healey boot hinges, they certainly look the same. SC Parts of Crawley do these relatively cheaply, probably cheaper than trying to rechrome the existing, but what SC parts will never do is check dimensions to ensure they are actually the same as their stock comes from Germany and isn't to hand for measuring (AH Spares will measure anything but oddly their price for the same hinges is much higher, usually it is the other way around). So is there anyone out there with an Austin Healey 3000, or a Daimler Dart/SP250 as S C Parts list the same hinges for both cars, who could check the dimensions of the hinges? What i am trying to match is as the photo below.
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Kees Oudesluijs
>>> 
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>> 
>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>>> 
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>> 
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>> 
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> 
>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>> 
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/autofarm@wightman.ca
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200101/28df48f3/attachment.htm>


More information about the Healeys mailing list