[Healeys] carb removal
Alan Seigrist
healey.nut at gmail.com
Wed Dec 2 00:17:41 MST 2020
Those are called half moon wrenches.
On Wed, Dec 2, 2020 at 2:26 PM healeymanjim via Healeys <
healeys at autox.team.net> wrote:
> years ago i bought a set of "C" wrenches(not sure of proper name) aat
> harbor freight for about 3 dollars. have never used
> but the half inch one. i can reach in from the bottom to loosen the nuts,
> then spin them off with my fingers or a
> screwdriver. i always remove both at one time on a BJ8, although i have
> removed only one on earlier models. you still
> have to loosen the other carb a bit to remove the throttle connector.
> better to remove both, seems to save time.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201202/8fa871e6/attachment.htm>
More information about the Healeys
mailing list