[Healeys] Today's Rant

[warthodson at aol.com]

They are not absolutely necessary, but the factory didn't install useless things for no reason. From you description it sounds like you do not have the correct dust shield for your backplate. 
Gary

-----Original Message-----
From: Michael MacLean <rrengineer.mike at att.net>
To: Healeys <healeys at autox.team.net>
Sent: Sun, Sep 22, 2019 10:18 am
Subject: [Healeys] Today's Rant

If you guys don't mind, here's today's rant.  I have struggling with fitting the backplates dust shields to my BN2 disc brake conversion.  These backplates would have to be fitted before the extended splined hub is assembled on the car.  I tried every way I thought they should be put on the car, but could not get the mounting tabs to line up with the caliper plate bolts.Not even close.  I'm ready to finish the front hubs and disc brakes without the backplates.  Is there any of you guys running conversions or standard disc brakes without these things?  Do I absolutely have to put these things on the car?  Ok, that's the rant for this week.Mike MacLean


Sent from Yahoo Mail on Android_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190922/13fcc73f/attachment.html>