[Healeys] Radiator shovel

[Robert Begani]

The pictures did not have my comments attached,

!. Trim the shovel to fit the frame.
2. Shows the way the it should fit to the frame with the flange pointing
down.  However, I cut the valve hole wrong and had to flip flop it.
3. Note the lip should be pointing  down so you can install the mounting
screws to the frame from underneath and remember to get the hole for the
radiator drain valve large enough to install it.  
4. Painted the same color as the car.  Looks good and really funnels the air
into the engine compartment so you do not over heat down to 30-40 mph.
5. Should have been a factory install.  I recommend the Shovel baffle for
all Healey cars.  There never is too much cooling air flowing through the
engine compartment.  When I was test driving my Healey after the rebuild
without the tunnel, I could feel the air flowing through the engine
compartment like a tornado.

Bob Begani

-----Original Message-----
From: Bob Begani <rfbegani at gmail.com> 
Sent: Wednesday, October 30, 2019 12:05 PM
To: eyera3000 at gmail.com; Bob Begani <rfbegani at gmail.com>; Healey Email list
<healeys at autox.team.net>
Subject: Radiator shovel

Here are pictures of what I fabricated from the picture I got from someone
on the list which I no longer have