[Healeys] Fwd: Down pipes
Bob Spidell
bspidell at comcast.net
Thu Oct 17 10:20:42 MDT 2019
Begin forwarded message:
> From: Bob Spidell <bspidell at comcast.net>
> Date: October 17, 2019 at 8:21:17 AM PDT
> To: Fred Wescoe <fredwescoe at gmail.com>
> Subject: Re: [Healeys] Down pipes
>
> I tried everything: new nuts, SS studs and torquing the snot out of the nuts (snapping a stud in the process) and still they would work loose. Finally gave up and double-nutted with mild steel nuts with high-temp anti-seize on the studs; they haven’t loosened since.
>
>> On Oct 16, 2019, at 6:19 PM, Fred Wescoe <fredwescoe at gmail.com> wrote:
>>
>>
>> Listers,
>>
>> Today, I had to tighten the 6 nuts on my exhaust down pipes. This is the second time in 2 years I have had to do this. What is causing the nuts to work loose? Each of the 6 studs from the exhaust manifolds has split lock washers and brass nuts on the down pipe flanges. Each time time I have tightened the nuts, I tighten them until the nuts squeak.
>>
>> What am I doing wrong and does anyone else have this issue? What do I need to do to fix this? The car is a 66 BJ8 with stock manifolds and down pipes.
>>
>> Thanks for any advice, I'm stumped,
>>
>> Fred
>> 66 BJ8
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191017/83a1b949/attachment.htm>
More information about the Healeys
mailing list