[Healeys] Bulb holder issue

i erbs eyera3000 at gmail.com
Tue Nov 26 15:02:57 MST 2019


what I have done in other applications i break the glass and then use a
needle nosed pliers to grab the base push and turn it out.
Ira Erbs
Portland,OR
      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)
          BT7 engine and disk brakes


1967 MGB  [image: MG]

A racing car is an animal with a thousand adjustments. Mario Andretti
Please excuse random auto corrects and misspelled words


On Tue, Nov 26, 2019 at 1:56 PM Michael Oritt <michael.oritt at gmail.com>
wrote:

> I have been struggling with the removal/replacement of the halogen
> taillight bulbs on my car. I simply cannot get q good enough grip on the
> bulb to push/turn and remove it from the bayonet socket.  Unlike later cars
> the glass lens on the 100 is almost flat, the bulb is straight with no
> shoulder and does not project very far beyond the surface of the
> receptacle.
>
> I'm sure there is a trick here--can anyone share it with me?
>
> Best--Michael Oritt
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191126/ecec5a28/attachment.htm>


More information about the Healeys mailing list