[Healeys] Carburetor Heat Shield BT7 Mk1

[Michael Salter]

Hi Harold,
Yes I have several  2 carb heat shield insulations.
[image: image.png]
The one you require is on the left.
These are riveted to the steel heatshield plate.
They are $CDN 45ea + Shipping.


M

On Wed, Nov 13, 2019 at 8:01 AM Michael Salter <michaelsalter at gmail.com>
wrote:

> Yes ... I'll check what I have and get back to you.
>
> M
>
> On Tue, Nov 12, 2019, 8:07 PM manifold at telus.net, <manifold at telus.net>
> wrote:
>
>> Michael,
>>
>> Are your for sale/
>>
>> Harold
>>
>> ------------------------------
>> *From: *"Michael Salter" <michaelsalter at gmail.com>
>> *To: *"Harold Manifold" <manifold at telus.net>
>> *Cc: *"Healey Bruce" <healeybruce at roadrunner.com>, healeys at autox.team.net
>> *Sent: *Tuesday, 12 November, 2019 05:35:42
>> *Subject: *Re: [Healeys] Carburetor Heat Shield BT7 Mk1
>>
>> I believe that I still have several that were water jet cut using
>> originals as patterns.
>>
>> M
>>
>> On Mon, Nov 11, 2019, 4:16 PM Harold Manifold, <manifold at telus.net>
>> wrote:
>>
>>> I looked at the Moss kit but it isn't available anymore. Was the Moss
>>> heat shield made from Hardi Board?
>>>
>>> Harold
>>>
>>> ------------------------------
>>> *From:* Bruce Steele [mailto:healeybruce at roadrunner.com]
>>> *Sent:* Monday, November 11, 2019 12:59 PM
>>> *To:* 'Harold Manifold'; 'Ahealey help'
>>> *Subject:* RE: [Healeys] Carburetor Heat Shield BT7 Mk1
>>>
>>> Eric Grunden of Absolutely British worked with Moss to design their heat
>>> shield replacement kit, which uses cement board.  I used their kit when I
>>> last had my engine out a couple of years ago and found it to be a good
>>> quality reproduction that fit well.
>>>
>>>
>>>
>>> Bruce Steele
>>>
>>> Brea, CA
>>>
>>> 1960 BN7
>>>
>>>
>>>
>>> *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of *Harold
>>> Manifold
>>> *Sent:* Monday, November 11, 2019 11:48 AM
>>> *To:* 'Ahealey help' <healeys at autox.team.net>
>>> *Subject:* [Healeys] Carburetor Heat Shield BT7 Mk1
>>>
>>>
>>>
>>> Help,
>>>
>>>
>>>
>>> Any suggestions on the best material to make a carburetor heat shield. I
>>> won't re-use the original asbestos part for obvious reasons. The metal part
>>> is fine and I just need the insulation material.
>>>
>>>
>>>
>>> Thanks.... Harold
>>>
>>> 1960 BT7
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>>
>>> Archive: http://www.team.net/pipermail/healeys
>>> http://autox.team.net/archive
>>>
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191115/2bac1a2d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 701747 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20191115/2bac1a2d/attachment.png>