[Healeys] Carburetor Heat Shield BT7 Mk1

[Harold Manifold]

I looked at the Moss kit but it isn't available anymore. Was the Moss heat
shield made from Hardi Board?
 
Harold

  _____  

From: Bruce Steele [mailto:healeybruce at roadrunner.com] 
Sent: Monday, November 11, 2019 12:59 PM
To: 'Harold Manifold'; 'Ahealey help'
Subject: RE: [Healeys] Carburetor Heat Shield BT7 Mk1



Eric Grunden of Absolutely British worked with Moss to design their heat
shield replacement kit, which uses cement board.  I used their kit when I
last had my engine out a couple of years ago and found it to be a good
quality reproduction that fit well.

 

Bruce Steele

Brea, CA

1960 BN7

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Harold
Manifold
Sent: Monday, November 11, 2019 11:48 AM
To: 'Ahealey help' <healeys at autox.team.net>
Subject: [Healeys] Carburetor Heat Shield BT7 Mk1

 

Help,

 

Any suggestions on the best material to make a carburetor heat shield. I
won't re-use the original asbestos part for obvious reasons. The metal part
is fine and I just need the insulation material.

 

Thanks.... Harold

1960 BT7

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191111/6d7df250/attachment.htm>