[Healeys] fuel sending unit gasket
bspidell at comcast.net
Thu May 23 18:04:13 MDT 2019
FWIW, the viton gaskets didn't work for me; cork with a sealant did.
On 5/23/2019 9:46 AM, Michael MacLean wrote:
> Not that I am endorsing them, but Moss recommends the use of
> Hylomar AF specifically for this purpose. By the way, it would be a
> positive upgrade to use the Viton replacement gaskets also available
> from Moss to replace the old cork type. While we are at it, you
> should replace the plastic float (if you have one) with a brass
> replacement type. OK, my lecture is over.
> Mike MacLean
> On Thursday, May 23, 2019, 9:11:08 AM PDT,
> <simon.lachlan at alexarevel.plus.com> wrote:
> So, if it sounds and tastes like Hylomar, you should be OK.
> *From:*Healeys <healeys-bounces at autox.team.net> *On Behalf Of *Bob Spidell
> *Sent:* 23 May 2019 17:05
> *To:* healeys at autox.team.net
> *Subject:* Re: [Healeys] fuel sending unit gasket
> I've had good results with this (looks, smells and feels like Hylomar):
> On 5/23/2019 6:49 AM, Dr C A Rubino wrote:
> What sealant should it use when installing this?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys