[Healeys] Corrosion on Clutch Master
WILLIAM B LAWRENCE
ynotink at msn.com
Fri May 3 09:11:14 MDT 2019
From: Healeys <healeys-bounces at autox.team.net> on behalf of R. Lindsay <050.rpl at gmail.com>
Sent: Friday, May 3, 2019 12:50 PM
To: michaelsalter at gmail.com
Cc: Healey List
Subject: Re: [Healeys] Corrosion on Clutch Master
Corrosion is on the outside. I’ll clean it and make sure the joints are tight.
Email: 050.rpl at gmail.com<mailto:050.rpl at gmail.com>
Sent from my iPhone
On May 2, 2019, at 7:39 PM, Michael Salter <michael.salter at gmail.com<mailto:michael.salter at gmail.com>> wrote:
Hi Price you don't mention whether the corrosion is in the bore or on the outside.
Corrosion on the outside is usually as indication that there is a small leak of brake fluid. On aluminum cylinders it produces a crusty white deposit which is usually easily cleaned off. The leak will be under the corrosion.
Corrosion in the bore is not so good but can often be corrected by rebuilding the cylinder.
NEVER hone aluminum cylinder bores ... the cylinder will be irreparably damaged.
On Thu, May 2, 2019, 6:18 PM R. Lindsay, <050.rpl at gmail.com<mailto:050.rpl at gmail.com>> wrote:
I have a small buildup of corrosion on the surface of my clutch master. Any ideas on what could be causing this?
Thank you so much for the help.
Sent from my iPad
Support Team.Net<http://Team.Net> http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys at autox.team.net<mailto:Healeys at autox.team.net>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys