[Healeys] wtb: oil line L-shaped bracket

[Bluehealey]

Hey Bob.
It seems TomF has been surreptitiously retrieving them.
😉

Alan - from my iPad

> On 27 Jun 2019, at 03:11, Bob Spidell <bspidell at comcast.net> wrote:
> 
> Wow.  I've never seen that bracket on any Healey.  
> 
> Now, I gotta have one.
> 
> bs
> 
> 
> 
>> On 6/26/2019 6:33 PM, Bob Haskell wrote:
>> Listers, 
>> 
>> I'm looking for the L-shaped bracket pictured in the attached photo.  It attaches to the firewall using one of the screws that holds the firewall insulation in place.  On the other end has a P-clip that holds the oil pressure gauge line. 
>> 
>> The photo is from one of Moss' firewall insulation installation instructions.  The instructions have two photos that show the bracket, one for a BN7 MkII and one BJ8. 
>> 
>> The bracket is not shown or listed in the factory parts manual I have. It looks like the P clip might be listed.  PCR0307 introduced at car 13751, which is the first tri-carb. 
>> 
>> I've checked with a few of the usual suspects (BSC, Healey Surgeons, Kilmartin, AH Spares) and haven't had any luck.  Suggestions? 
>> 
>> Looks like it would be easy enough to make, but would like to have one in hand to get the dimensions off of. 
>> 
>> Cheers, 
>> 
>> Bob Haskell 
>> Austin Healey 3000 BN7/BT7 registrar
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bluehealey@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190627/28b8a447/attachment.html>