[Healeys] Rear Hub Spline Extensions

[Michael MacLean]

 Thanks Mike.  I didn't see that coming.  So, does the tightening physics of thread direction only apply to the hub extensions?  Easy to make a serious mistake here.  Thanks again.Mike M

    On Friday, June 21, 2019, 11:33:58 AM PDT, Michael Salter <michaelsalter at gmail.com> wrote:  
 
 Hi Mike, No Mike, just to keep things interesting the threads on the extensions are the opposite to the bearing nuts ...so:
Bearing nutsLHS left hand thread.RHS right hand thread
Wire wheel adaptors (Spinners)LHS right hand threadRHS left hand thread 
M


On Fri, Jun 21, 2019, 1:46 PM Mike MacLean, <rrengineer.mike at att.net> wrote:

I am finishing up the rear axle for my BN2 by installing the hubs and hub extensions.  Am I correct in assuming that the hub extension threads are "handed" in the same direction as the hub nuts?  Mike MacLean_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190621/ee73b9ae/attachment.html>