[Healeys] Distance Piece Needed

Bob Haskell rchaskell at earthlink.net
Fri Jun 14 06:34:51 MDT 2019


Mike,

I'm sure someone will have one.  If not, I can make one on the lathe.

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar

On 6/14/19 8:25 AM, Mike MacLean wrote:
> This past week was very satisfying finally putting the rear axle in my 
> BN2.  I thought I had all the hardware and parts to complete this, but 
> looking at the exploded parts diagram in the Moss web site I find one 
> thing missing that Moss lists as N/A.  The spacer or distance Piece that 
> sits between the two plates welded to the axle where the shock link 
> passes through.  For some reason it stayed on one side without the shock 
> link, but not the other.  Anyone have a junk rear axle with this little 
> tube?  I have no idea what Moss would have charged for this, but I'd be 
> willing to shoot five bucks your way.  I would consider just cutting it 
> from some steel tubing, but I am not sure I could make a nice square 
> parallel cut.
> Mike MacLean
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
> 


More information about the Healeys mailing list