[Healeys] Anti-Sway Bar

Charles Schott schottc at knology.net
Tue Jul 23 16:47:53 MDT 2019


Mike, 

The original bar on my 100 was also 1/2" but I'm installing a 7/8" one. AH Spares has them at 5/8", 3/4" and 7/8". And they have polyurethane bushings. 

Regards, 

Charlie Schott 

----- Original Message -----

From: "Mike MacLean" <rrengineer.mike at att.net> 
To: "Perry" <healeyguy at aol.com> 
Cc: healeys at autox.team.net 
Sent: Tuesday, July 23, 2019 12:37:55 PM 
Subject: Re: [Healeys] Anti-Sway Bar 

It seems my anti-sway bar is the original 1/2" bar. My curiosity was rooted in the fact I used to own an original sway bar for my Bugeye. That was 1/2" diameter also. I recently rebuilt the front suspension on the Bugeye which included new lower a-arms of the later type for later Spridgets. The new lower a-arms came with the reinforced holes for mounting a sway bar. The new bar on the Bugeye is 5/8". It doesn't seem right the smaller car has a bigger sway bar. 
Mike MacLean 

On Jul 23, 2019 6:48 AM, Perry <healeyguy at aol.com> wrote: 





Mike 

Sorry, my BN2 measures 5/8 inch but I also measured the 10 other sway bars upstairs in the garage and 4 were ½ inch and the rest 5/8 inch. Suspect I put a 6 cylinder bar on it 17 years ago during the last resto. Have had that car for 54 years. 

P 





Sent from Mail for Windows 10 




From: Michael MacLean 
Sent: Tuesday, July 23, 2019 12:44 AM 
To: Healeys 
Subject: [Healeys] Anti-Sway Bar 




What is the diameter of a 100 anti-sway bar? I just tried to put urethane bushings on the one I have with my BN2 (the two center ones held on with a metal strap) and the hole in the bushing was way too big. What good is that? I switched to a rubber set I have and they fit better, but still a little loose. 

Mike MacLean 







_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/schottc@knology.net 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190723/f4ab7656/attachment.html>


More information about the Healeys mailing list