[Healeys] No oil pressure BJ8

[josef-eckert at t-online.de]

Have you fitted an oil filter conversion?
Often the oil bores are blocked by fitting those the wrong way.  Better to 
stay with the original oil filter setup.
 
Josef Eckert
European Member
 
 
 
-----Original-Nachricht-----
Betreff: [Healeys] No oil pressure BJ8
Datum: 2019-01-11T22:36:35+0100
Von: "Robert Begani" <rfbegani at gmail.com>
An: "healeys at autox.team.net" <healeys at autox.team.net>
 
 
 

Last year I pulled the engine, had it machined, new bearings etc.  Got it 
back in the engine compartment, and assembled the mufflers, carbs, and 
added oils. So I could start the engine.  As per Kees recommendation 
removed the spark plugs and spun the engine to check oil pressure.  Gauge 
did not budge.  Removed the new flexible hose from the engine to the 
pressure gauge, spun the engine, no oil coming from the engine.  Ideas what 
to do now?

 

Bob Begani

BJ8 67


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190111/e5296032/attachment.html>