[Healeys] coolant sensor nut

[Mirek Sharp]

I do likewise with the hose clamp and it works really well.  I also always
put some anti-seize grease on the threads, AND, I slide the nut up the
capillary tube and put some around the tube and top of the bulb so the nut
will not seize on them. It seems to really help when I next have to remove
it.  I use Permatex copper anti-seize grease.

Mirek

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of David P
Sent: February-07-19 8:05 AM
To: healeymanjim; healeys at autox.team.net
Subject: Re: [Healeys] coolant sensor nut

I do the same, but add a hose clamp around the cut in the socket so it 
won't spread around the nut when pressure is applied. Works for me. DP
On 2/6/2019 8:40 PM, healeymanjim wrote:
> i took a good quality long 5/8 socket and cut a slot in it about one and a
half inches long.  i always soak the nut for a few
> days in penetrating oil.  still have a problem sometimes and have to work
it back and forth carefully to keep from stripping
> the nut.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
>
>
>
-- 
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My
World go here: WWW.PORTERBIKES.COM/


---
This email has been checked for viruses by AVG.
https://www.avg.com

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/m.g.sharp@sympatico.ca