[Healeys] coolant sensor nut

[David P]

I do the same, but add a hose clamp around the cut in the socket so it 
won't spread around the nut when pressure is applied. Works for me. DP
On 2/6/2019 8:40 PM, healeymanjim wrote:
> i took a good quality long 5/8 socket and cut a slot in it about one and a half inches long.  i always soak the nut for a few
> days in penetrating oil.  still have a problem sometimes and have to work it back and forth carefully to keep from stripping
> the nut.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
>
>
>
-- 
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here: WWW.PORTERBIKES.COM/


---
This email has been checked for viruses by AVG.
https://www.avg.com