[Healeys] Ford versus Ferrari

[jim]

 the operative phrase being "in the movie" ...maybe they used "the force" ????
Jim

    On Wednesday, December 18, 2019, 5:51:29 AM UTC, WILLIAM B LAWRENCE <ynotink at msn.com> wrote:  
 
 In the movie, although there wasn't much technical explanation, it appeared that they removed and replaced the entire suspension upright assembly with new stub axles, hubs, rotors and calipers in place. I was thinking they must have used some kind of quick connect on the brake lines with a quick bleeder in place.
Bill LawrenceBN1 #554From: Healeys <healeys-bounces at autox.team.net> on behalf of Alan Seigrist <healey.nut at gmail.com>
Sent: Wednesday, December 18, 2019 3:22 AM
To: jim <ab7vf at yahoo.com>
Cc: Healey list <healeys at autox.team.net>
Subject: Re: [Healeys] Ford versus Ferrari as long as you are removing the brake pads and not the calipers, no need bleed anything.  Honestly with some practice on the BJ8, with a full pit crew, you could probably remove and replace the rotors and pads in 5 min or less if assemblies were ready.

On Sun, Dec 15, 2019 at 2:43 AM jim via Healeys <healeys at autox.team.net> wrote:

Changing "rotors" ..Changing "pads" ...Changing "calipers" ...Not equivalent

 the ONLY time I need to open the fluid lines is when I have to change "calipers"
All the caliper change directions I have seen advise to prefill/pre bleed caliper before fitting

Heat? ...Use a CO2 extinguisher (you do have a current certified one in your shop) ...I do
change pads .. c clamp to press piston back into caliper (use a large screwdriver/pry bar if you are changing pads/rotors)fluid will flow back into reservoir ...If you don't want the crud from the caliper back into the system, crack the bleeder valve..ditto for changing rotors 

Remove 2 pins to change pads//remove 2 bolts to change rotors/pads
suspend "caliper" from ? to avoid kinking/twisting flex line
remove/replace rotors ..
remove/replace pads ..

Piece o' cake (go to Les Schwab and watch how they do it)
Jim




On Friday, December 13, 2019, 5:01:27 PM UTC, Bob Spidell <bspidell at comcast.net> wrote:

I wondered that myself.   Maybe some sort of check valve on the brake lines and pre-filled calipers, allowing bleeding with just a couple quick pumps on the brake pedal?

Of course, it was a movie, so maybe it was the figment of some screenpaly writer's imagination?

Bob

On 12/13/2019 7:01 AM, Linwood Rose via Healeys wrote:

For those who saw the movie "Ford versus Ferrari." On the Phil Remington quick change rotor/caliper assembly, how do they avoid having to bleed the brakes?
Just curious.

Lin


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ab7vf@yahoo.com

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191218/d3f85af6/attachment.htm>