[Healeys] Thanks for all the help (richard mayor)

[richard mayor]

There were a number of reasons. The first one that comes to mind is that I
could not use HD8s with the stock manifold. The 240 Z manifold also had
lots of clutter and linkage that I did not want to use.  If you look at my
engine you will not see any choke cable or throttle linkage. As a
comparison, here's a photo of a stock '79 280Z engine compartment.
[image: engine frt.jpg]


On Thu, Dec 12, 2019 at 8:14 PM Steve Gerow <sgerow2 at gmail.com> wrote:

> Richard,
> That's a nice install of a Z-car motor in a Healey. Am curious whether it
> sounds anything like a Healey.
>
> Nice custom manifold. Curious also why you didn't use the stock Z-car
> manifold?
>
> --
> *Steve Gerow*
> BN6
> Altadena, CA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191212/b7079680/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: engine frt.jpg
Type: image/jpeg
Size: 140725 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20191212/b7079680/attachment.jpg>