[Healeys] Top bows question

i erbs eyera3000 at gmail.com
Thu Dec 12 07:07:21 MST 2019


Just re read this.  It did not convey what I meant to say. "Cobbled" was
said tongue in cheek.  Your fabrication skills are impressive. I wanted
folks to know it was a two seater, as their top bows are different than a
four seater. No insult intended.

Ira Erbs
Portland,OR
1959 Austin Healey BN4
1967 MGB

On Wed, Dec 11, 2019, 3:28 PM i erbs <eyera3000 at gmail.com> wrote:

> Sorry Richard
> Your skills come without question. Said, fitmlywith tongue in cheek.
>
> Ira Erbs
> Portland,OR
> 1959 Austin Healey BN4
> 1967 MGB
>
> On Wed, Dec 11, 2019, 3:26 PM richard mayor <boyracer466 at gmail.com> wrote:
>
>> Ira,    Seriously?!?!   I'm offended!  I don't "cobble" anything
>> together.  There is nothing "cobbled together" in putting a two seater rear
>> shroud on a BT7 - using a factory 2 seater shroud and the  factory support
>> brace.  The shroud is a direct bolt on affair. I did not cut anything or
>> modify anything other than to add the factory shroud support brace over the
>> wheel arches.  And even then, I did not weld it in. It is riveted so it can
>> be easily undone.   Here's a photo so the listers can judge for themselves
>> if I "cobbled" it together.
>> [image: DSCN4746.jpg]
>>
>>
>> On Tue, Dec 10, 2019 at 6:19 PM i erbs <eyera3000 at gmail.com> wrote:
>>
>>> What year is the body? Is this your cobbled together 2 seater? BT7 had a
>>> bent and straight legged top bow. Bent leg fit in front holes, the straight
>>> in back on four seaters
>>> Never seen plastic inserts.
>>>
>>> Ira Erbs
>>> Portland,OR
>>> 1959 Austin Healey BN4
>>> 1967 MGB
>>>
>>> On Tue, Dec 10, 2019, 6:03 PM richard mayor <boyracer466 at gmail.com>
>>> wrote:
>>>
>>>> I'm getting ready to have a new top installed and making sure I have
>>>> all the right bits.  The top bow legs fit into sockets.  I read somewhere
>>>> that the factory used plastic sleeves in the sockets. Moss does not show
>>>> any sleeves in their catalogue.  The sockets are a larger than the top bow
>>>> legs so It makes sense to me to find something that will take up a bit of
>>>> that slop. Any suggestions?
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>>
>>>> Archive: http://www.team.net/pipermail/healeys
>>>> http://autox.team.net/archive
>>>>
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>
>>>> Unsubscribe/Manage:
>>>> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>>>>
>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191212/3fea6a8f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSCN4746.jpg
Type: image/jpeg
Size: 1827257 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20191212/3fea6a8f/attachment.jpg>


More information about the Healeys mailing list