[Healeys] Rear Shock Mounting Bolts

[Mark Fawcett]

I just did this. I took a large flat head screw driver and wedged it
between the bolt head and the chassis to keep the bolt from turning when
tightening the nut.

Mark Fawcett

On Thu, Aug 1, 2019 at 7:01 PM Harold Manifold <manifold at telus.net> wrote:

> What is the secret to tightening the rear shock mounting bolts on an
> Armstrong lever arm shock absorber? After attacking the problem
> unsuccessfully with many different tools I ground one side of an
> inexpensive 9/16" socket until it would fit to hold the head of the bolt.
> Surely BMC had a better method.
>
>
>
> Harold
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/m.fawcett@cox.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190801/48f6fe7a/attachment.html>