[Healeys] Tapping SUs for air filters

i erbs eyera3000 at gmail.com
Thu Nov 22 21:38:31 MST 2018

Looks like a Longbridge 100-6. The HD8s on my car might not fit under the
cowl if mooved further out from the manifold. But clever solution.

Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone

On Thu, Nov 22, 2018, 7:23 PM Steve B. Gerow <steveg at abrazosdata.com wrote:

> This setup makes air cleaner removal easy - I was running this setup
> before I modified my cleaners for my DMD manifold:
> I bolted 5/16" coupling nuts inside my K&N filters. Bolts coming thru the
> outside plate, then spacers, then the couplings resting against the inside
> of the inside plate.
> The filters are attached from the inside of the carb tangs with 5/16" SS
> socket head (Allen) screws. These go through the tangs and engage threads
> of the coupling nuts.
> For a wrench, I'm using a foot long, ball-end, T-handle Allen wrench.
> Some ideas are here:
> http://www.pbase.com/stevegerow/dmd_air_filter_mods&page=all
> --
> Steve Gerow
> Altadena, CA
> Maker of Most Complete Big Healey Rear Disc Kit
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181122/bd8a160a/attachment.html>

More information about the Healeys mailing list