[Healeys] Measurement Please

S. Carr britfan1 at epix.net
Mon Nov 12 09:25:05 MST 2018


Mike --

I used the flat area that runs down the center of the trunk floor, between the two raised areas, as a reference.  That flat area is 4-1/2” wide.  The center line of the striker plate’s angled support is 3-1/4” in from the left edge of the flat area, and 1-1/4” in from the right edge.

Sarah Carr
BN1 in PA

From: Michael MacLean 
Sent: Saturday, November 10, 2018 2:52 PM
To: Ahealey Help 
Subject: [Healeys] Measurement Please

Can someone lift the trunk lid on their 100 and measure the distances either side of the center support that the striker plate is bolted to?  Just the center of the upright support to outer hoop edges would be fine.  The knucklehead that did my body work thought it should be perfectly centered and welded it there.  Now the striker plate is nowhere near the latch mechanism on the trunk lid and I have to make a plate that bolts to the center support to relocate the striker plate.  Thanks.
Mike MacLean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181112/19dbc61e/attachment.html>


More information about the Healeys mailing list