[Healeys] Questions of the day

[Bob Spidell]

On the contrarian side, seems like extra work to me.  I wired a bare BN2 
chassis just using the schematic in the shop manual and going by the 
color codes.  Got it 100% correct, but one of the wires in the harness 
had the wrong colors and the rear turn signals didn't work right, so 
keep an eye out for that kind of goof.  Took a while to debug that one 
(even opened up the relay box).

Bob


On 11/8/2018 10:31 AM, Bruce Steele wrote:
>
> I second blue painters tape.
>
> Bruce Steele
>
> Brea, CA
>
> 1960 BN7
>
> *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of 
> *Team.net
> *Sent:* Thursday, November 08, 2018 3:50 AM
> *To:* Kees Oudesluijs <coudesluijs at chello.nl>
> *Cc:* healeys at autox.team.net
> *Subject:* Re: [Healeys] Questions of the day
>
> Use blue painters tape
>
> Easily removed
>
> It won’t tear up the loom
>
>
> On Nov 8, 2018, at 3:46 AM, Kees Oudesluijs <coudesluijs at chello.nl 
> <mailto:coudesluijs at chello.nl>> wrote:
>
>     I always use masking tape, cheap and easily written on with
>     ballpoint, pencil or marker.
>
>     Kees Oudesluijs
>
>     Op 7-11-2018 om 22:23 schreef Michael MacLean:
>
>         I have a good vacuum unit for a distributor with the markings
>         421943 and 7-18-12.  can anyone tell me the application of
>         this unit?  Second question.  What is best to use to label the
>         wire ends of my wiring harness for installation?
>
>         Mike MacLean
>
>         <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
>
>         	
>
>         Virus-free. www.avg.com
>         <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
>
>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181108/ab1b12f8/attachment.html>