[Healeys] LUMBAR SUPPORT

[i erbs]

I cut off and welded on a .5" extension to the fulcrum bolt on the seat
base and had an inflatable lumbar support added below the seat back
material when I had the seats recovered. I also drilled a hole in the seat
back sides .5 inch higher, this too increased the set back rake. I am going
to put the bolt back in the oem ho;e as the seat back tilts too fart
backwards now.

Ira Erbs
Portland,OR
      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)
          BT7 engine and disk brakes


1967 MGB  [image: MG]

A racing car is an animal with a thousand adjustments. Mario Andretti
Please excuse random auto corrects and misspelled words

On Mon, May 28, 2018 at 8:13 AM, Robert Begani <rfbegani at gmail.com> wrote:

> A throw pillow, or a small pillow that acts as a lumbar support covered in
> a sheep skin made by my wife many years ago has solved most of my back
> problems when driving the Healey.  Her side has one also.  Real sheep wool
> breaths much better than fabric.  When I am driving again, am hoping the
> fittings on the hinge of the back causing a tilt will provide additional
> help.
>
>
>
> Bob Begani
>
> BJ8 67
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180528/ca532b1e/attachment.html>