[Healeys] Kilmartin frame rail repair pieces

i erbs eyera3000 at gmail.com
Tue Mar 27 19:50:46 MDT 2018

Bigger hammer

Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone

On Tue, Mar 27, 2018, 5:57 PM richard mayor <boyracer466 at gmail.com> wrote:

> Thanks for all the replies. Kilmartin makes repair pieces that patch into
> either the top side or the bottom side of the chassis rails. They make two
> sizes AH 554 and AH 555. AH 554 is the same width as the chassis rail.  AH
> 555 is a narrower repair piece that can be inserted into the top or the
> bottom of a chassis rail. The 1" lip fits inside the chassis rail.
> It turns out I have the narrower piece but it did not appear to me, when I
> posted this question, that it was narrow enough to fit within the sides. It
> looks like its gonna be a very tight fit.
> On Mon, Mar 26, 2018 at 5:50 PM, richard mayor <boyracer466 at gmail.com>
> wrote:
>> I bought a length of a Kilmartin frame rail repair piece.  I assumed when
>> I bought it that it was slightly undersized so it would fit between the
>> existing sides. It appears to be slightly narrower then the factory frame
>> rail side but not narrow enough  to fit inside. Can any one out there sheds
>> some light on the best way to deal with this situation?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180328/81628f73/attachment.html>

More information about the Healeys mailing list