[Healeys] Horns

[Jean Caron]

Ray,

Make sure your gaskets are the same thickness as those you took out. Then reassemble them according to the bulletin you have and test one to see if it is in working order, likely some adjustment will be needed, I use a battery pack to bench test them. Lots of fiddling sometimes, other times you get a good tone right off the bat.


Jean


________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Ray Juncal <healeyray at yahoo.com>
Sent: March 8, 2018 10:53 PM
To: Healey List
Subject: [Healeys] Horns

My horns are ready to put back together thanks to help and support from folks on the list. I'm hoping everything works and I can get things adjusted OK. The inner workings look pretty clean so fingers crossed that electrical winding and and wiring are good. Points carefully cleaned and new gaskets cut. Is there anything I have missed or should look out for on re-assembly? What is the wisdom of the list.
Thanks all
Ray
Yes I know the acorn nut is supposed to be paint and not polished. I just couldn't help myself.

[Inline image]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180309/2463e80e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1969.JPG
Type: image/jpeg
Size: 619692 bytes
Desc: IMG_1969.JPG
URL: <http://autox.team.net/pipermail/healeys/attachments/20180309/2463e80e/attachment.jpe>