[Healeys] rear axle wheel bearing locknut wrench
Frank Magnusson
fmags at cox.net
Sat Jun 9 16:12:56 MDT 2018
John,
A 12 pt. Socket will work barely. The problem with it is that is just barely engages maybe 3/16 inch on each end of some of the flats. Also because the large locking washer behind the nut is curved, a 12 pt socket barely engages the nut in depth due to the chamfer on the socket and the curvature of the locking washer. Having tried this and also using a custom made crowfoot wrench, Id higher recommend finding an 8 pt socket. Sounds like David Nock has them. Thats the way to go IMHO having tried it other ways.
Frank
'65 BJ 8
Sent from my iPad
More information about the Healeys
mailing list