[Healeys] Propshaft

[John Davidson]

There is a SMALL grease nipple that screws in for lubricating the 
universal joint. Fit the grease nipple and rotate the drive shaft to 
confirm that the grease nipple does not interfere with the u-joints

John R Davidson, P. Eng.
H (204) 895-4523; C (204) 295-9207

On 2018-07-27 12:08 PM, Bob Haskell wrote:
> It's a vent hole; no plug.
>
> Cheers,
>
> Bob Haskell
> AHCA 3000 MkI registrar
> http://www.ciahc.org/registry_3000mk1.php
>
> On 07/27/2018 11:05 AM, Rossm wrote:
>> There is a small hole on the front end of the propshaft. When the 
>> propshaft compresses grease comes out. Is there supposed to be a plug 
>> in there?
>> Thx
>>
>>
>>
>>
>>
>> Sent from my iPhone
>>
>>
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/john.davidson@avtrak.ca
>