[Healeys] window screws

[Bob Spidell]

The definitive story (see attached; courtesy Moss).

Also, my door windows rattled for years until I figured out the rear 
channels were just a skosh too wide for the plastic guides; a slight 
squeeze of the channel solved the rattling (too much and you'll bind the 
window).

Bob


On 1/23/2018 7:48 PM, healeymanjim wrote:
> more than a few healeys i have worked on have scratched glass.  i pull the sharp pointed sheet metal screws that someone
> has replaced the flat pointed original screws with ones i have ground off the points to a flat surface.  i have also seen long
> panel screws that scratched glass.  BEWARE!!!
>
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: doorpullscrews.pdf
Type: application/pdf
Size: 77610 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180124/02e8e3a7/attachment.pdf>