[Healeys] Unknown spring

[Per Schoerner]

Hi
Brake shoes are held in place by springs of that form. It is to be mounted behind the shoes, thus ”pressing” them against the back plate, or rather a post fitted to the back plate. It looks quite small, so I suspect it belongs to a Sprite.

Best regards, Per

Skickat från min iPhone

> 21 jan. 2018 kl. 17:19 skrev Michael Salter <michaelsalter at gmail.com>:
> 
> I have been sorting through a couple of buckets of fasteners that I have had plated and come across this spring.
> <image.png>
> 
> I'm sure I have seen it on a Healey somewhere but cannot remember where. 
> It isn't from the hand brake rods, nor the roadster door latch.
> It is very stiff, I and only extend it about 1/4" by hand pulling.
> The wire diameter is around 1/16".
> Any ideas anyone?
> 
> M
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per@schoerner.se
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180121/ddd02a6b/attachment.html>