[Healeys] Healeys Digest, Vol 11, Issue 16

[editorgary at aol.com]

So this battery isn't going to fit in the battery trays. Too long; too bad.
G.

 

 

Gary Anderson
Los Altos, California


 

 

-----Original Message-----
From: Jean Caron <vintage_roadster_restoration at hotmail.com>
To: editorgary <editorgary at aol.com>; healeys <healeys at autox.team.net>
Sent: Sat, Jan 13, 2018 1:58 pm
Subject: Re: [Healeys] Healeys Digest, Vol 11, Issue 16



The dimensions I have on trays I have here are as follows:
7 1/16" X 713/16", those are inside dimensions.


Jean




From: Healeys <healeys-bounces at autox.team.net> on behalf of editorgary at aol.com <editorgary at aol.com>
Sent: January 13, 2018 8:24 PM
To: healeys at autox.team.net
Subject: Re: [Healeys] Healeys Digest, Vol 11, Issue 16
 




On the Tractor supply menu for the battery, the specifications are shown in
detail. Meanwhile, here is the L x w x h:




Product Height: 

8-5/8 in. 


Product Length: 

8-13/16 in. 


Product Weight: 

27 lb. 


Product Type: 

Tractor Batteries 


Product Width: 

6-3/4 in.

Which could fit into the tray, I believe.



Regards



Bob Begani


Unfortunately, you missed my point -- I could find the specifications on the website just as you did. What I DON'T know are the specifications of the original tar top 6V batteries. The length and width of the batteries have to fit in the battery tray and level space for the hold-downs to pass through the tray, and the battery has to be short enough so that the tops of the terminals don't come near touching the battery compartment lid.



Does anyone have an original battery to measure, or know the exact dimensions?


G



Gary Anderson
Los Altos, California








-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180113/4d9b8b47/attachment.html>