[Healeys] Vacuum Advance Tube

[Len and/or Marge Hartnett]

Patrick:  Mine is under the bolt head of the bottom bolt holding the heater shut off valve to the engine block.

(The Other) Len
Fairfield, CA, USA
1967 AH 3000 MkIII, HBJ8L39031

  ----- Original Message ----- 
  From: Patrick & Caroline Quinn 
  To: healeys at autox.team.net 
  Sent: Saturday, January 06, 2018 6:49 PM
  Subject: [Healeys] Vacuum Advance Tube


  Hello

   

  Greetings from Sydney where the temperature is a barmy 46C (114F). However there is something comforting in that the Cricket test match between Australia and England is proceeding.

   

  Just cleaned and polished the narrow copper vacuum advance tube in the BN3 that goes from the rear carburettor around the back of the engine and then to the distributor. 

   

  Bent around the tube towards the distributor is a steel clip that bolts on to something, but my memory is failing me and the photos taken a few years back don't show it. 

   

  Remember it is a very early six-cylinder engine. Perhaps it fastens to one of the bolts holding the heater outlet to the cylinder head.

   

  Can anyone help please?

   

  Thank you

   

  Patrick Quinn

  Blue Mountains, Australia



------------------------------------------------------------------------------


  _______________________________________________
  Support Team.Net http://www.team.net/donate.html
  Suggested annual donation  $12.75
  Archive: http://www.team.net/archive
  Forums: http://www.team.net/forums

  Healeys at autox.team.net
  http://autox.team.net/mailman/listinfo/healeys

  Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/thehartnetts@earthlink.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180106/df7b3b46/attachment.html>