[Healeys] Drum Balancing

Sat Feb 17 21:15:08 MST 2018

When I first considered this, I was told that shaving the fins would change the heat ratio with uneven dispersion. (I doubted this as the amount of metal removed would be minimal). I was told the drums were originally ground slightly off center causing the shaking. Hendrix adds metal and that is what I went with. It sounded safer to me. He did a great job and I am happy.

________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Mirek Sharp <m.g.sharp at sympatico.ca>
Sent: Saturday, February 17, 2018 7:20 PM
To: 'Charlie Baldwin'; healeys at autox.team.net
Subject: Re: [Healeys] Drum Balancing

Can someone clarify a few of the comments on drum balancing.  A couple of people said they had them done by various specialists on a lathe by skimming the fins.  This will make the outside of the drum round, which I imagine must help, but that is different from balancing, which I understand may involve subtracting and/or adding weight in strategic places, as one would in balancing a tyre.  I don’t think balancing can be achieved simply by truing the outside of the drum, but I am glad to be corrected.  So by drum balancing, are these wonderful accolades a result of drum truing or drum balancing?

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Charlie Baldwin
Sent: February-17-18 6:25 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] Drum Balancing

One major thing to keep in mind when having someone balance your wheels or shave your tires is how they are mounted on their machine.  Wire wheels must be mounted on the machined surfaces not just with internal cones as a company that does not normally balance wire wheels would do.  It won't do any good to shave the tires from the wrong center.

So a specialist who understands British wire wheels is essential to having the job done properly.  Besides Hendrix there is K & T Vintage Sports Cars in Bethlehem, PA owned by Ken Beck, an Austin-Healey owner.  Check their website at http://www.ktvintagecars.com/ for a video of the tire shaving process.  I have some new tires for my MG wire wheels that I will have them mount and balance, and shave if required.  I know Ken, but never had any work done by him.  Others have great things to say about the process and their work in general.

K&T Vintage Sports Cars | British Repair and Restoration<http://www.ktvintagecars.com/>
www.ktvintagecars.com
K&T Vintage Sports Cars repairs all makes of classic British sports cars, and also has expertise on staff for Corvettes, DeLoreans, street rods and other classic cars.

I had my drums balanced several years ago by the local NAPA machine shop who do my engine rebuild machining.

Charlie Baldwin

'62 BT7

On 2/16/2018 9:16 PM, HealeyRick wrote:

Another satisfied customer of Hendrix Wire Wheels.  Mounted and balanced my Dayton wheels, shaved the Michelin's and balanced the rear drums.  Had it up to 104 mph on our speed run last summer (It's got a V8 but the rest of the suspension is stock Healey) and was smooth all the way up.  Drives at 2,000 rpm at 70 mph with its five speed and it's just a joy. Time for new tires this year and they are going back to Hendrix for the treatment.  Probably the most satisfying money you can spend on a Healey.

Rick Neville

[Image removed by sender.]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>

Virus-free. www.avast.com<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>

On Fri, Feb 16, 2018 at 3:36 PM, jim brown <jbrown5093 at yahoo.com<mailto:jbrown5093 at yahoo.com>> wrote:

Ditto on both of my Bt7 and Bj8. Remarkable difference after Hendrix Wire Wheel in Greensboro NC got a hold of them. I think he can shave tires also. Great to work with also

Jim Brown

On Friday, February 16, 2018, 1:52:02 PM EST, Gary R. Brierton <gbrierton at hotmail.com<mailto:gbrierton at hotmail.com>> wrote:

Allen Hendrix of HendrixWireWheel (in North Carolina) did my BJ8.  Rear Drums and (I think) the drive shaft.  I don't know exactly how it is done.  I always just hand the keys to Allen!

Smoothest BJ8 I've ever driven, including 2 purchased new back in the '60's.

________________________________

From: Healeys <healeys-bounces at autox.team.net<mailto:healeys-bounces at autox.team.net>> on behalf of Michael MacLean <rrengineer.mike at att.net<mailto:rrengineer.mike at att.net>>
Sent: Friday, February 16, 2018 6:55 AM
To: llennep at verizon.net<mailto:llennep at verizon.net>; healeys at autox.team.net<mailto:healeys at autox.team.net>
Subject: Re: [Healeys] Drum Balancing

Where did you get them balanced and how was it done?

Mike

Sent from Yahoo Mail on Android<https://overview.mail.yahoo.com/mobile/?.src=Android>

On Fri, Feb 16, 2018 at 12:45 AM, Keith Pennell

<llennep at verizon.net<mailto:llennep at verizon.net>> wrote:

Absolutely!   Eliminated 50-70% of scuttle shake in daily driving.  One of the best things I ever did to my cars.  Have balanced several sets.

-----Original Message-----
From: Michael MacLean <rrengineer.mike at att.net<mailto:rrengineer.mike at att.net>>
To: Healey List <healeys at autox.team.net<mailto:healeys at autox.team.net>>
Sent: Fri, Feb 16, 2018 1:22 am
Subject: [Healeys] Drum Balancing

I can understand balancing the front drums on my BN2 to help preclude scuttle shake, but I am converting to front disc brakes.  Is it necessary to balance the rear drums?

Mike MacLean

Sent from Yahoo Mail on Android<https://overview.mail.yahoo.com/mobile/?.src=Android>

_______________________________________________
Support Team.Net http://www.team.net/donate.html

www.team.net<http://www.team.net/donate.html>
www.team.net
The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ...

Suggested annual donation $12.75
Archive: http://www.team.net/archive
Team.Net Archives<http://www.team.net/archive>
www.team.net
Team.Net Archives. Archives listed from most recently updated to oldest updated.

Forums: http://www.team.net/forums

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys
Healeys -- Austin Healey Discussion - Team.Net<http://autox.team.net/mailman/listinfo/healeys>
autox.team.net
To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ...

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/llennep@verizon.net

_______________________________________________
Support Team.Net http://www.team.net/donate.html

www.team.net<http://www.team.net/donate.html>
www.team.net
The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ...

Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Team.Net Archives<http://www.team.net/archive>
www.team.net
Team.Net Archives. Archives listed from most recently updated to oldest updated.

Forums: http://www.team.net/forums

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys
Healeys -- Austin Healey Discussion - Team.Net<http://autox.team.net/mailman/listinfo/healeys>
autox.team.net
To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ...

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/jbrown5093@yahoo.com

_______________________________________________
Support Team.Net http://www.team.net/donate.html

www.team.net<http://www.team.net/donate.html>
www.team.net
The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ...

Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Team.Net Archives<http://www.team.net/archive>
www.team.net
Team.Net Archives. Archives listed from most recently updated to oldest updated.

Forums: http://www.team.net/forums

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys
Healeys -- Austin Healey Discussion - Team.Net<http://autox.team.net/mailman/listinfo/healeys>
autox.team.net
To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ...

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyrik@gmail.com

_______________________________________________

Support Team.Net http://www.team.net/donate.html

www.team.net<http://www.team.net/donate.html>
www.team.net
The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ...

Suggested annual donation  $12.75

Archive: http://www.team.net/archive

Team.Net Archives<http://www.team.net/archive>
www.team.net
Team.Net Archives. Archives listed from most recently updated to oldest updated.

Forums: http://www.team.net/forums

Healeys at autox.team.net<mailto:Healeys at autox.team.net>

http://autox.team.net/mailman/listinfo/healeys

Healeys -- Austin Healey Discussion - Team.Net<http://autox.team.net/mailman/listinfo/healeys>
autox.team.net
To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ...

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/mgcharlie@comcast.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180218/d60ef667/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 350 bytes
Desc: image001.jpg
URL: <http://autox.team.net/pipermail/healeys/attachments/20180218/d60ef667/attachment.jpg>