[Healeys] BT7 Mk II Door Shut Finisher - Adjustment?

[John Spaur]

Mine fit fine too, after a few installation tricks.

 

John Spaur

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Corning,
Dan (D.C.)
Sent: Monday, February 12, 2018 11:44 AM
To: healeys at autox.team.net
Subject: [Healeys] BT7 Mk II Door Shut Finisher - Adjustment?

 

Everything was going very smoothly installing the new Bristleflex door seals
and lower aluminum trim set.  Too smoothly.

 

A trial fit of the door shut finish set revealed the protrusion on the top
is misaligned.  Anyone experienced this before?

 

(The dotted line suggests what I'm thinking about)

 



Best, 


Dan Corning

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180213/5105413b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3016323 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180213/5105413b/attachment-0001.jpg>