[Healeys] Chassis thickness.

[Bruce Steele]

Simon, I took the latter approach using 12-guage steel to make a cap, which
has worked well.  See attached photos.  As Steve noted, the frames are
pretty flimsy at 14-gauge.  

 

Bruce Steele

Brea, CA

1960 BN7

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of
simon.lachlan at homecall.co.uk
Sent: Thursday, February 08, 2018 5:11 AM
To: healeys at autox.team.net
Subject: [Healeys] Chassis thickness.

 

Ever since I've owned my 3000 it's had a nasty dent in the front crossbeam
of the chassis. That would be the one near the bottom of the radiator. In
the car's history file there is reference to a serious grounding on a rock
whilst driving down a track in Spain.

Be that as it may, I've got the car up on a set of drive-on then jack up
ramps at the moment and seeing that dent has determined me to get something
done about it.

Solution one:- cut out the bent bit and weld in a new piece.

Solution two:- clean up the area and weld a plate over the whole cross beam
thus giving it additional strength etc.

What gauge is the chassis? I'd be putting something no thinner than the
existing and very probably a tad thicker. But I need to know the start
position.

Thanks,

Simon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010039.jpg
Type: image/jpeg
Size: 690158 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0007.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010040.jpg
Type: image/jpeg
Size: 695072 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0008.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010055.jpg
Type: image/jpeg
Size: 668222 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0009.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1302830503958.jpg
Type: image/jpeg
Size: 39002 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010036.jpg
Type: image/jpeg
Size: 637296 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0011.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010037.jpg
Type: image/jpeg
Size: 685132 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0012.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010038.jpg
Type: image/jpeg
Size: 767975 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20180208/97c57c34/attachment-0013.jpg>