[Healeys] Emergency brake bracket
Larry Wendland
bighealey3k at aim.com
Sun Feb 4 12:13:16 MST 2018
Or better yet us and Easy Out or similar screw extraction method. Google Easy Out and several methods show up. Good Luck.
Larry
'67 BJ8
-----Original Message-----
From: i erbs <eyera3000 at gmail.com>
To: Robert Begani <rfbegani at gmail.com>
Cc: Ahealey help <healeys at autox.team.net>
Sent: Sun, Feb 4, 2018 3:37 am
Subject: Re: [Healeys] Emergency brake bracket
I would get a dremmel and cut slots in the screw then spray anti rust penetrant, then apply heat if you can, carefully unscrew the screws.
Ira Erbs
Portland, OR
On Feb 3, 2018 5:14 PM, "Robert Begani" <rfbegani at gmail.com> wrote:
Hi David:
Just so happens I have the Tunnel available for your viewing pleasure. See
attached photos of the bracket. My emergency brake has not been on the car
for several years as the cable broke. I could not put the brake on the
bracket because the head of one of the screws was drilled out to get it off.
My next project is to get the frozen screw out and then find a reasonable
replacement.
Regards,
Bob Begani
BJ8 67
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com
More information about the Healeys
mailing list