[Healeys] Camshaft gear key

Fred Wescoe fredwescoe at gmail.com
Thu Dec 27 13:37:10 MST 2018


Simon,

I have used heavy grease to hold things in place during a difficult
assembly process.  I might caution that you need to decide if grease might
be a problem with assembly of parts in this area.  Otherwise, you might try
blue thread locker and let it set before assembly.  Or perhaps just use
rubber cement.

Fred
66 BJ8

On Thu, Dec 27, 2018 at 2:28 PM Per Schoerner <per at schoerner.se> wrote:

> Chewing gum?
>
> Per
>
> Skickat från min iPhone
>
> 27 dec. 2018 kl. 18:20 skrev <simon.lachlan at alexarevel.plus.com> <
> simon.lachlan at alexarevel.plus.com>:
>
> Hi,
>
> Trust you all had a pleasant Christmas.
>
> Whilst lining up to replace my 3000’s harmonic balancer, I decided to
> replace anything in that general area that might fail before I next delve
> in there again. So, the chain, the tensioner, the seal etcetc….all
> replaced. (I only seem to get in there about every 20 years).
>
> See attached.
>
> Started to rebuild and am attempting to get the chain in the right place
> and everything lined up. I get the bright links where they should be and
> start to push the two gears onto their shafts. All goes well until they’re
> *apparently* almost home. Then the little key drops to the floor. About 4
> times now….maddening. Is there a pros’ trick to this seemingly easy task?
> If there is, I’d really like to have it!
>
> Thanks,
>
> Simon
>
> <Tensioner copy.jpg>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/per@schoerner.se
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/fredwescoe@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181227/b2028f5a/attachment.html>


More information about the Healeys mailing list