[Healeys] Stuck generator

[i erbs]

Did you loosen the bottom bolt on the adjustment arm?

Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone

On Thu, Aug 9, 2018, 10:41 PM Bruce Steele <healeybruce at roadrunner.com>
wrote:

> Seeking the collective wisdom.  When I installed the generator on my newly
> rebuilt engine last December it was a tight fit.  Fine, I thought.  After
> 1,500 or so miles, Saturday the generator light comes on.  Upon inspection,
> the belt is intact, but I can turn the generator pulley by hand and the
> belt has too much play.  No problem, just tighten it up.  Wrong.  With all
> my strength I can’t get the generator to do more than barely wiggle with
> the mounting bolts fully slackened.  Thoughts on the best way to free up
> the generator’s up/down movement?  I’ll probably need to file down the ears
> a bit to make for an easier fit.
>
>
>
> Bruce Steele
>
> Brea, CA
>
> 1960 BN7
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180809/fd33c2fe/attachment.html>