[Healeys] Rocker Cover Poll

[Geraldine Rubino]

Buy a silicone gasket and you don,t have to stick it down and you can have the panel off and on with ease.

On Apr 7, 2018, at 12:32 PM, Patrick & Caroline Quinn <p_cquinn at tpg.com.au> wrote:

Hello
 
Having a lot of fun trying to stop a leak from the rear of the rocker cover of the BN3.
 
It’s a standard early C-series six-cylinder and pressed steel rocker cover with dome shape nuts.
 
The question is whether the accepted practice is to stick the cork gasket to the rocker cover with no jointing compound between the gasket and cylinder head. OR is the accepted practice to apply jointing compound to both surfaces?
 
Hoo Roo
 
Patrick Quinn
Blue Mountains, Australia
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ruvino@bradakis.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180407/57a8f347/attachment.html>