[Healeys] o/d relay
Chris Dimmock
austin.healey at gmail.com
Thu Apr 26 06:41:44 MDT 2018
stuck in overdrive?.
If so - jack the car up & support
it correctly. Ie so you don't kill yourself.
Get your knockoff hammer, and get underneath.
Hit the steel sandwich plate in the centre area of the alloy overdrive body a few times with your knockoff hammer. Sharp raps rather than belting - you can't get a big swing anyway, and you don't need one.
Now take it down off the ramps/ jacks/ stands, and go for a drive & see if you can select overdrive now (or more correctly, unselect overdrive)
The overdrive springs sometimes get stuck - its the springs that release it. The solenoid selects under hydrolic pressure -springs release.
a Healey locked in overdrive is impossible to push backwards
> On 26 Apr 2018, at 2:34 pm, healeymanjim <healeymanjim at hansencc.net> wrote:
>
> my overdrive is always engaged. i checked the dash switch and it is good. i am assuming the relay is the problem. have
> cleaned it up and sanded the points but no joy. anything else it might be?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180426/80d11e5c/attachment.html>
More information about the Healeys
mailing list