[Healeys] Bellows Thermostats

[Michael MacLean]

The blanking sleeve has a small lip that sits in the same recess as the thermostat.  Not sure both the blanking sleeve lip and a thermostat together will fit and seal the cover correctly.Mike MacLean

Sent from Yahoo Mail on Android 
 
  On Mon, Sep 4, 2017 at 7:07 AM, Bob Haskell<rchaskell at earthlink.net> wrote:   Moss sells a thermostat bypass blanking sleeve.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=69821

I wonder if you could combine this with a "standard" thermostat to 
approach the original with the sleeve?

Cheers,

Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php

On 09/04/2017 07:20 AM, Per Schoerner wrote:
> Hi
> Why not block the bypass channel once and for all, maybe combined with a little hole in the termostat lid to allow some circulation.
> I have done this with a piece from a little cat food can. It works very well. An other way to do it would be to make a new water pump gasket without the hole for the bypass.
> 
> Per
> 
> Skickat från min iPhone
> 
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
> 
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170904/c2531d32/attachment.html>