[Healeys] Fuel Tank sealers

[Jean Caron]

So we have been debating fuel tanks for a few days now and whether or not one should seal it etc. I just checked the Moss website and right now there is a sale on 20% off, a steel gas tank is $189.99, plus $15.00 for oversize shipping.

So this works out to $167.00 for a gas tank.

But if you want to get an aluminium one it's $619.99 minus the 20% which works out to $496.00.

I have difficulty understanding why, someone who drives a car worth around $50000.00 or more, does not want to spend between $167.00 to $500.00 for a gas tank. It blows my mind.


Jean


________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Simon Lachlan <simon.lachlan at homecall.co.uk>
Sent: October 27, 2017 8:38 PM
To: warthodson at aol.com; RFBegani at speakeasy.net; healeys at autox.team.net
Subject: Re: [Healeys] Fuel Tank sealers


When my tank developed a pinhole leak I just ordered an aluminum tank.  No more issues….cross your fingers, but surely aluminum is the way to go?

(I’d never had any discernible rust inside until it started to smell and just ooze a little fuel. I never did hack the old one apart to look at the filter etcetc)

Simon



From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of warthodson at aol.com
Sent: 27 October 2017 15:17
To: RFBegani at speakeasy.net; healeys at autox.team.net
Subject: Re: [Healeys] Fuel Tank sealers



A friend coated the inside of his tank. After about 5-8 years he began having fuel delivery issues. The coating was separating from the tank & would get sucked up against the pickup tube when the car was running. When the car was shut off or would die due to fuel starvation the coating would drift away from the pickup tube & the engine would re-start. It took a long time to diagnose the source of the problem. When you think about it, the inside of a rusty fuel tank & fuel is a harsh environment to try to protect with a coating.

There is a point where a new fuel tank makes a lot of sense.

 Gary Hodson



-----Original Message-----
From: Robert F. Begani <RFBegani at speakeasy.net<mailto:RFBegani at speakeasy.net>>
To: healeys <healeys at autox.team.net<mailto:healeys at autox.team.net>>
Sent: Thu, Oct 26, 2017 5:24 pm
Subject: [Healeys] Fuel Tank sealers

Johns recent comment about his use of sealers on a fuel tank which lasted 15 years.  25 years ago when I bought my BJ8,  I had mine sealed inside and out with an epoxy by a well known local specialist Al’s Radiator in the western suburbs of Chicago.  I called them because of heavy rust plugging the full pump and carb filter.  They were surprised it lasted that long and recommended having it done again.  They are now a part of a rather expensive franchise program which has dealers in Florida.  However, I would like to flush and seal myself.  Has the members of  the list have any suggestions?  The tank does not leak and is original to the vehicle.



Bob Begani

BJ8 ‘67

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171028/3ba34738/attachment.html>