[Healeys] Fuel tank questions

[Tim Davis BN7]

In the past I have responded to a fuel tank repair questions extolling the virtues of using tank sealers and my tank which I sealed 15 years ago recently started leaking. Anyway I had an aftermarket tank originally from Sports and Classics that I obtained from somewhere and after pulling mine out and test fitting the other I see that the filler neck is at a slightly different angle. I think I can get it to connect up but wanted to know if anyone sees this as a non Healey tank. The fuel output fitting and sender unit flange are correct.It also appears to be a bit smaller and the tank bottom where the drain is located is a little different, i.e. 2 circular protrusions rather than one rectangular one. Please see photos, the filler necks may look different diameter but are the same. 


Tim Davis BN7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171023/b9207916/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SAM_1331.JPG
Type: image/jpeg
Size: 262923 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20171023/b9207916/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SAM_1330.JPG
Type: image/jpeg
Size: 257206 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20171023/b9207916/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SAM_1334.JPG
Type: image/jpeg
Size: 315729 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20171023/b9207916/attachment-0002.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SAM_1333.JPG
Type: image/jpeg
Size: 266029 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20171023/b9207916/attachment-0003.jpe>