[Healeys] 100 piston sources

[warthodson at aol.com]

I will be purchasing a set of pistons for a 100 engine in the near future & am interested in your suggestions concerning sources.
I am planning on a compression ratio of 9.5 to 10.0:1
I would prefer forged pistons & am anticipating needing to bore at least .030" over, maybe more.
Denis Welch does not offer forged pistons larger that 88 mm which might not be large enough. 88mm = 3.4646" - 3.4375" (std. bore) = .0271" difference
Any suggestions you have will be appreciated.

Gary Hodson 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171121/6d964943/attachment.html>